Equaleasy - neoprene hoods and equalisation
Text by Claudio Di Manao
We lose heat mainly from our head. This applies to all of us, including those who don't seem to use their heads much. Energy doesn’t dissipate as a result of brain activity, but because of blood circulation. To reduce this heat loss from the head, we often wear a hood when diving. Besides its intended purpose however, a hood also has the unfortunate distinction of being the only piece of diving equipment that can interfere directly with equalisation.
Hoods are not particularly loved by divers, as is amply evidenced by the abuse we inflict on them. We perforate them with holes and ‘decorate’ them with accoutrements of questionable taste, such as ears (Mickey Mouse, cat, bunny) or horns (devil, Viking). I freely admit having taken a perverse delight in perforating the integrated hood of my semi-dry with a power drill. We would never do this to a BCD!
Our dislike for diving hoods may be the product of strange behaviours—the hood’s, not ours. All diving hoods made on earth seek to trap air and sneak underneath mask skirts. Wearing gloves (which often go together with a hood) makes it hard to prevent random migration of the mask strap over the hood’s outer surface, and harder still to remove that damnable little bit of neoprene that has crept under the mask skirt and is causing a leak.
While we are acutely aware of these annoyances (we don’t want to look like Marge Simpson, and we don’t want to readjust our mask strap every five minutes), the most worrying characteristic of hoods is often ignored by divers: their tendency to mess with our ears.
We lose heat mainly from our head. This applies to all of us, including those who don't seem to use their heads much. Energy doesn’t dissipate as a result of brain activity, but because of blood circulation. To reduce this heat loss from the head, we often wear a hood when diving. Besides its intended purpose however, a hood also has the unfortunate distinction of being the only piece of diving equipment that can interfere directly with equalisation.
Hoods are not particularly loved by divers, as is amply evidenced by the abuse we inflict on them. We perforate them with holes and ‘decorate’ them with accoutrements of questionable taste, such as ears (Mickey Mouse, cat, bunny) or horns (devil, Viking). I freely admit having taken a perverse delight in perforating the integrated hood of my semi-dry with a power drill. We would never do this to a BCD!
Our dislike for diving hoods may be the product of strange behaviours—the hood’s, not ours. All diving hoods made on earth seek to trap air and sneak underneath mask skirts. Wearing gloves (which often go together with a hood) makes it hard to prevent random migration of the mask strap over the hood’s outer surface, and harder still to remove that damnable little bit of neoprene that has crept under the mask skirt and is causing a leak.
While we are acutely aware of these annoyances (we don’t want to look like Marge Simpson, and we don’t want to readjust our mask strap every five minutes), the most worrying characteristic of hoods is often ignored by divers: their tendency to mess with our ears.
Know your "frenemy".
Hoods can be one of the most insidious causes of barotrauma. When we dive, our ear canal is flooded by water, which exerts direct pressure on the outer ear. When a hood is too tight, it can block off or significantly reduce the flow of water into the ear canal. In the worst case, the hood fits itself perfectly to the auricle and behaves like a suction cup during descent. At the beginning of the descent, the diver may not notice the incoming problem. Both ears seem to equalise just fine. However, there is a vacuum forming in one ear canal, which causes the eardrum to stretch outward. This event (very similar to a mask squeeze) if not promptly detected, could damage the tissues of the ear canal and the eardrum.
Hoods can be one of the most insidious causes of barotrauma. When we dive, our ear canal is flooded by water, which exerts direct pressure on the outer ear. When a hood is too tight, it can block off or significantly reduce the flow of water into the ear canal. In the worst case, the hood fits itself perfectly to the auricle and behaves like a suction cup during descent. At the beginning of the descent, the diver may not notice the incoming problem. Both ears seem to equalise just fine. However, there is a vacuum forming in one ear canal, which causes the eardrum to stretch outward. This event (very similar to a mask squeeze) if not promptly detected, could damage the tissues of the ear canal and the eardrum.
Countermeasures.
A diving hood must fit smoothly, like a glove. Water must reach the ear canal, air must escape. A tried and trusted trick is to insert a finger in the hood, pointing at the ear. This will help the air to escape and allow water in. Another trick: If you are one of those people who love to brutalise diving hoods, you can punch a few holes in the hood where it meets the ears, then cover the area with a layer of permeable fabric. This will help water circulation into the ear canal, while preventing it from sloshing around and making your entire head feel cold. Strange enough, most divers pierce only the top of the hood – the least strategic area. Of course, there are much worse mistakes you could make. On a forum, I once read a question by a diver asking if his ‘usual’ equalisation problems when diving with a hood could be prevented by using earplugs. I felt shivers running up and down my spine. The replies reflected the same horror and alarm that I felt and came in all capital letters: Ear plugs, at depth, turn into bullets aimed straight at the eardrums. Yes, I know, you know that. I’ll say it anyway, just in case. Someone else might need the reminder.
Sadly for cold-water divers, dry hoods with a valve and low-pressure inflator are unlikely to ever become reality. Nor will full-face masks solve our problem. Let us accept the fact that for the foreseeable future, cold water will be entering our hood. It has to. The good news? Electrically heated hoods are already on the market.
A diving hood must fit smoothly, like a glove. Water must reach the ear canal, air must escape. A tried and trusted trick is to insert a finger in the hood, pointing at the ear. This will help the air to escape and allow water in. Another trick: If you are one of those people who love to brutalise diving hoods, you can punch a few holes in the hood where it meets the ears, then cover the area with a layer of permeable fabric. This will help water circulation into the ear canal, while preventing it from sloshing around and making your entire head feel cold. Strange enough, most divers pierce only the top of the hood – the least strategic area. Of course, there are much worse mistakes you could make. On a forum, I once read a question by a diver asking if his ‘usual’ equalisation problems when diving with a hood could be prevented by using earplugs. I felt shivers running up and down my spine. The replies reflected the same horror and alarm that I felt and came in all capital letters: Ear plugs, at depth, turn into bullets aimed straight at the eardrums. Yes, I know, you know that. I’ll say it anyway, just in case. Someone else might need the reminder.
Sadly for cold-water divers, dry hoods with a valve and low-pressure inflator are unlikely to ever become reality. Nor will full-face masks solve our problem. Let us accept the fact that for the foreseeable future, cold water will be entering our hood. It has to. The good news? Electrically heated hoods are already on the market.
Posted in DAN Europe Blog, Dive Safety Tips, Research
Posted in Hood, Insulation, Heat loss, Cold Water, Protection, Equalisation, diving hoods
Posted in Hood, Insulation, Heat loss, Cold Water, Protection, Equalisation, diving hoods
Categories
2024
February
March
April
May
October
My name is Rosanne… DAN was there for me?My name is Pam… DAN was there for me?My name is Nadia… DAN was there for me?My name is Morgan… DAN was there for me?My name is Mark… DAN was there for me?My name is Julika… DAN was there for me?My name is James Lewis… DAN was there for me?My name is Jack… DAN was there for me?My name is Mrs. Du Toit… DAN was there for me?My name is Sean… DAN was there for me?My name is Clayton… DAN was there for me?My name is Claire… DAN was there for me?My name is Lauren… DAN was there for me?My name is Amos… DAN was there for me?My name is Kelly… DAN was there for me?Get to Know DAN Instructor: Mauro JijeGet to know DAN Instructor: JP BarnardGet to know DAN Instructor: Sinda da GraçaGet to know DAN instructor Trainer: Christo van JaarsveldGet to know DAN instructor: Gregory DriesselGet to Know DAN Instructor: Beto Vambiane
November
Get to know DAN Instructor: Dylan BowlesGet to know DAN instructor: Ryan CapazorioGet to know DAN Instructor: Tyrone LubbeGet to know DAN Instructor Trainer: Christo van JaarsveldGet to know DAN Instructor: Caitlyn MonahanSafety AngelsDiving With A PFODiving Anilao with Adam SokolskiScience Saves SharksUnderwater NavigationUnderstanding Dive Equipment Regulations
2023
January
March
Terrific Freedive ModeKaboom!....The Big Oxygen Safety IssueScuba Nudi ClothingThe Benefits of Being BaldDive into Freedive InstructionCape Marine Research and Diver DevelopmentThe Inhaca Ocean Alliance.“LIGHTS, Film, Action!”Demo DiversSpecial Forces DiverWhat Dive Computers Don\'t Know | PART 2Toughing It Out Is Dangerous
April
July
August
September
Mismatched Scuba Valves to Cylinder OutletsUnderwater Crime Scene InvestigatorsDive Boat Etiquette – From Yachts to rubber ducksTravel Smarter: Personal Safety While TravelingLiability in ContextLearning from Success. Learning from MistakeDive in the Fast Lane with DPVsKwaZulu Natal shipwrecks: The ProduceAvoid Diving With EarplugsThe Parting Shot